Readers and Injectors for Every PIT Tagging Workflow
Choose a handheld reader for close-range recapture work or longer-range FDX-B and HDX scans, then pair it with the injector, cartridges, and needles required for your fieldwork.
- FDX-B · Low Frequency
- FDX-B + HDX Handheld
- 10-Shot Injector
Choose the Right Reader
-
In-Hand or at Range?
Choose the URH-2 for close-range scans when the animal is already in hand. Choose the URH-300HP when you need 6–8" of range for larger animals or hard-to-reach implant sites.
-
FDX-B or HDX?
The URH-2 reads FDX-B and supports FDX-A tags. The URH-300HP reads both FDX-B and HDX for fieldwork that requires both formats.
-
Scanning in or Near Water?
Pair the URH-300HP with the URH-PLEX telescoping antenna. Put the antenna in the water while the reader stays dry on the bank or in the boat for submerged and out-of-reach scans.
-
How Many Tags per Session?
Use a single-shot needle for low-volume work or smaller tags. For repeated 2.1 × 13 mm implants, the UMTI-10 holds up to 10 tags, so you can implant several animals before reloading.
Two Field Readers
Both readers support ISO PIT tags. Choose based on protocol, read range, and where you scan.
URH-2 vs. URH-300HP
Compare read range, data output, environmental protection, and field use.
| Capability | URH-2 Medium-Range Handheld | URH-300HP High-Power Handheld |
|---|---|---|
| Read Range | Up to 2.8" (7.1 cm) | 6–8" (15–20 cm) |
| Protocols | FDX-B and supported FDX-A | FDX-B and HDX |
| Data Output | USB; HID keyboard or serial | USB; optional Bluetooth |
| Weight | 0.5 lb | 3 lb |
| Protection Class | IP54 | IP67 |
| URH-PLEX Antenna | | |
| Best For | In-hand recapture scanning | Longer-range, underwater, and HDX scanning |
Other Products You May Need for Fieldwork
Injectors, cartridges, needles, and more.
Common Questions
-
What does the URH-PLEX antenna add?
The URH-PLEX adds underwater and out-of-reach scanning to the URH-300HP. Put the antenna in the water while the reader stays on the bank or boat.
-
Will these tags read on agency or PTAGIS-style arrays and other vendors' ISO readers?
Yes. UID FDX-B tags operate at 134.2 kHz and conform to ISO 11784/11785, so compatible agency arrays and other ISO-compliant FDX-B readers can read them. The URH-300HP also reads compatible ISO tags from other manufacturers.
-
Which tag sizes does the UMTI-10 handle?
The UMTI-10 multi-injector handles only 2.1 × 13 mm FDX-B tags; it does not support 1.4 × 8.5 mm small-species tags. For the smaller size, use a single-shot needle instead.
-
How many tags before I reload?
Ten. Each UMTI-CAR cartridge holds up to 10 tags, and the UMTI-10 advances one tag per implant. Empty cartridges are refillable, so you can prepare spares before a field session.
-
How should the needles be sterilized?
The replacement needles ship non-sterile. Sterilize and replace them according to your approved IACUC, permit, or study protocol. See PIT tags for the tags these tools implant.
Not Sure Which Reader and Injector You Need?
Tell us which tag formats you use, how far you need to scan, and how many animals you tag in a session. We'll help you choose the reader, injector, and accessories that fit your program.